Skip to main content

Damage & Inspections

Damage reports are registered on return or manually. Inspections apply to technical equipment for which periodic safety checks are legally required or recommended.

Quick Overview​

Via More → Damage reports and More → Inspections you manage the condition of your stock: items with a barcode and quantities without a barcode (for example ear tips). An item with an open damage report has the status In repair and does not count towards availability until the repair is complete.

Damage Reports​

Creating When Checking In​

The fastest way to register damage is directly when checking in (the Innemen screen). After scanning an item, choose Report damage and fill in the details. See Scanning for the step-by-step guide.

Reporting via the Order​

On an order with status Out or Returned, tap Schade melden (report damage). In the dialog:

  • tick the items with a barcode that are damaged (or tap Scan);
  • under Artikelen zonder barcode (items without a barcode), set the number of damaged pieces per line with − and +;
  • choose the severity, describe the damage and optionally add photos.

Each ticked item and each line with a quantity becomes one damage report. Pieces without a barcode are written off the stock immediately.

Charging the Customer​

If you are allowed to edit orders, the dialog shows Doorbelasten aan de klant (charge the customer). Switch it on and enter an amount per report (excl. VAT) — if the product has a standard damage amount, that amount (unit price × quantity) is already filled in and you can adjust it. Each report then adds a line Schade: … (damage) to the order, with the VAT of the product (or of the default VAT category).

  • If the order is still open (up to Invoicing without an invoice), the line is included in the regular invoice.
  • If the order has already been invoiced or completed, Rentstuff creates a new draft invoice containing only the damage line.
  • If the order was invoiced outside Rentstuff (including a monthly order set to Wordt extern gefactureerd), Rentstuff creates no invoice. The damage line is still added to the order and the report is kept; you get "De order is buiten Rentstuff gefactureerd — factureer de schade daar." (the order was invoiced outside Rentstuff — invoice the damage there).
  • With monthly invoicing, the line is included in the last monthly invoice, also when that comes only after the return. If the last monthly invoice has already been created, Rentstuff creates a draft invoice with only the damage line after the return; if the order is still Out, you get a message that you need to invoice the damage line yourself.

Afterwards you can edit or remove the line on the order like any other line.

Creating Manually​

You can also create a damage report without an order via More → Operations → Damage reports and +:

  1. At the top, choose Met barcode (with barcode) or Zonder barcode (without barcode).
  2. With barcode: scan the item. Without barcode: choose the product, the location to write off from (or Automatisch, automatic) and the quantity.
  3. Choose the severity and describe the damage.
  4. Tap Save. The report opens; add photos there.

Severity Levels​

SeverityCodeDescription
MinorminorSurface damage, small scratch. Item still directly usable.
MajormajorFunctional damage. Repair required before the item can be dispatched again.
Total losstotal_lossItem is irreparably damaged or missing.

Damage Report Status Flow​

Open → In repair → Repaired
→ Written off
StatusDescription
openDamage registered, no action yet
in_repairItem is with the repairer or being processed
repairedRepair complete, item available again
written_offItem written off (e.g. for total loss)

For items without a barcode, the stock is written off when the damage is reported:

  • Markeer hersteld (terug op voorraad) (mark repaired, back in stock) books the quantity back onto the location it was written off from.
  • Afsluiten als afgeschreven (close as written off) closes the report; the stock stays written off.

A closed report (Repaired or Written off) can no longer change status.

Block on Open Damage Report

When you report damage on an item with a barcode, the item gets the status In repair and an open repair block. It then does not count towards availability and cannot be dispatched. If the item is still with the customer, this happens when checking in. Repaired lifts the block (if no other open report exists for the item). Written off removes the item from stock; this is only possible once the item has been returned.

Recording Repair Costs​

On the damage report detail page you can enter the repair costs. This field is used for internal administration and potential recharging to the customer.

Charging Later​

If a report belongs to an order and has not been charged yet, the detail page shows Doorbelasten aan de klant (charge the customer; only if you may edit orders). Enter the amount excl. VAT — if the product has a standard damage amount, it is already proposed (unit price × the report's quantity) and you can adjust it. The line is added to the order, or to a new draft invoice, as described in Charging the Customer. Afterwards the amount and the invoice are shown here. A report can be charged only once.

Adding Photos​

Multiple photos can be uploaded with each damage report. The photos are stored in file storage and are visible on the detail page and the item's damage history.

Inspections​

Inspections are mandatory or periodic checks on the safety and operation of equipment. Examples include NEN 3140 inspection of electrical tools, or a general safety inspection of climbing equipment.

Recording an Inspection​

  1. Go to More → Inspections and tap +, or open the stock item and tap Add inspection.
  2. Select the inspection type:
TypeDescription
nen3140NEN 3140 electrical inspection
generalGeneral safety inspection
  1. Enter the inspection date and the inspector (name or company).
  2. Choose the result:
ResultDescription
approvedApproved, item is safe
failedRejected, item must be taken out of service
conditionalConditionally approved with remarks
  1. Set the validity date (valid_until).
  2. Optionally add notes and tap Save.

Inspection Settings per Product​

An administrator can configure the following inspection flags per product via the product management screen (Settings → Products → [product] → Inspections):

FlagDescription
requires_inspectionThe product requires an active, valid inspection before dispatch
inspection_interval_daysThe maximum validity period of an inspection in days (e.g. 365 for annual inspection)
inspection_hard_blockIf true: expired inspection hard-blocks dispatch. If false: expired inspection only shows a warning
Setting the interval

Set inspection_interval_days to the legally or internally required inspection interval. The app automatically calculates when the next inspection expires based on the inspection date plus this interval.

Inspection Status and Blocking​

At every dispatch scan the app automatically checks whether the item's inspection is still valid:

  • If the inspection is valid: no notification, scan proceeds.
  • If the inspection has expired and Hard block (inspection_hard_block = true) is on: the scan is rejected with error message INSPECTION_EXPIRED. Dispatch is not possible until a new inspection is registered.
  • If the inspection has expired and Hard block (inspection_hard_block = false) is off: the app shows a warning but allows the scan.
Setting Hard Block

The administrator sets per product whether an expired inspection hard-blocks dispatch or merely warns. Adjust inspection_hard_block via the product management screen.

Inspection History per Item​

On the stock item detail page, under Inspections, you see a complete list of all performed inspections sorted by date. This is the official inspection log for the item.